Name: China Hot Rolled Mn13 High Manganese Hadfield Wear Resistant Steel Plate Manufacturers, Suppliers, Factory - SCLF - Liaofu
Brand: Liaofu
SKU: 160030226

Sichuan Liaofu Special Steel Company is one of the most experienced manufacturers and suppliers of hot rolled mn13 high manganese hadfield wear resistant steel plate in China. With over 20 years' experience, our factory offer high quality products made in China with competitive price. Welcome to contact us for wholesale service.

Hot Rolled Mn13 High Manganese Hadfield Wear Resistant Steel Plate abrasion steel sheet

Mn13 rolled steel plate has excellent wear resistance under strong impact and high pressure. The wear-resisting performance of the pre-processed Mn13 rolled steel plate is much higher than that of imported low-alloy wear-resisting steel in the environment of no impact or less pressure, and of course much stronger than domestic wear-resisting steel NM420. And the cutting and welding performance is very good. It is widely used in the shot blasting machine industry. With high tensile strength, plasticity and toughness and non-magnetic, even if the parts wear to very thin, still can withstand the larger impact load without breaking, can be used for casting a variety of impact resistant wear parts, such as ball mill lining plate, excavator bucket teeth, crusher teeth, etc. It is generally used for low impact castings with simple structure and wear resistance, such as lining plate, tooth plate, broken wall, rolling mortar wall, roll sleeve and shovel teeth.

Tolerances
More details are given rochure 41-General product information Weld, Hard, Armox and Toolox-UK
AccuRollTech meets the requirements of EN 10 029 Class A, but o! ers narrower tolerances.
Length and width
According to Customer's dimensions program. Tolerances conforms with EN 10 029 or to standard after agreement.
Shape tolerances according to EN 10 029
Flatness According to Hengchengtai flatness tolerances, which are more narrow than EN 10 029 Class N (steel type L).
Surface Properties
According to EN 10 163-2 Class A, Subclass 1.
Delivery Conditions
The delivery condition is Q+T (Quenched and Tempered). The plates are delivered with sheared or thermally cut edges. Untrimmed edges after agreement. Delivery requirements can be found in brochure 41-General product information Weld,Hard, Armox and Toolox-UK.
Fabrication and Other Recommendations Welding, bending and machining
Weld 700 has obtained its mechanical properties by quenching and subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 580ºC.
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product.
Grinding, especially of primer coated plates, may produce dust with a high particle concentration.

we are Manufacturer, Supplier & Exporter of Mn13 Steel Plate. With years of experience in manufacturing Mn13 steel plate we offer high quality, lower cost but the best service. Weld 700 is a general structural steel with a minimum yield strength of 700 MPa. Mn13 meets the requirements for the corresponding steel grades and qualities according to EN 10025. Weld 700 Plates can be customized as per the client's requirements at affordable price. We can provide Weld 700 plate that's suitable for all these applications and more.

In addition, we can also perform flame cutting if necessary, as well as a wide range of other post-cutting services, including stress relieving, bending, drilling, and wash grinding.Weld 700 E is available in plate thicknesses of 4 - 160 mm and Weld 700 F is available in plate thicknesses of 4 - 130 mm. Both grades are available in widths up to 3350 mm and lengths up to 14630 mm. For thicknesses over 100 mm preferred width is 1650 mm with untrimmed edge. We Export to Saudi Arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Japan, Australia, UAE, France, Azerbaijan, Ghana, Germany, Indonesia & Bahrain, Kazakhstan, Greece, Singapore, Thailand, Indonesia.