Since our company has been engaged in the research and development of 1.2379 Steel Bar, 30crnimo8 chemical component, Alloy Steel Bar for many years, we have accumulated a lot of experience to facilitate users to choose high-quality products. We take integrity as the foundation, adhere to the principle of seeking truth from facts, abide by the spirit of the contract, and win the trust from employees, customers and stakeholders. Our company is committed to the development of new processes and technologies, and strives to win the market and win customers with excellent quality, reasonable prices, fast and timely delivery, and satisfactory service. Cooperate with us will be your best choice! In order to cope with the development of economic globalization, we must rely on our own advantages and strive to open up emerging markets.
Introduction
AISI 321/JIS SUS321 Austenite heat resistant stainless steel bar.
Type 321 stainless steel is Ni - Cr – Ti austenitic stainless steel, its performance is very similar with 304, but due to join the metal titanium, make it have better grain boundary corrosion resistance and high temperature strength. Because of adding titanium, make its effective control the formation of chromium carbide.
321 stainless steel has excellent high temperature Stress Rupture (Stress Rupture) properties and high temperature Creep Resistance (Creep to hold) Stress and mechanical properties are better than that of 304 stainless steel.
Standards: ASTM, JIS, GB, EN (DIN, BS, NF) Or Per as clients’ requires.
321 shows good corrosion resistance in natural environmental media (rural waters and industrial atmospheres) and most diluted organic acids at moderate temperatures, but does not perform well in more corrosive media such as chlorine solutions or sulfuric acid. AISI 321 is less machinable, but can be easily welded by most standard processes and does not require post-weld heat treatment.
321 Stainless Steel Applications
Ideal uses for 321 stainless steel include expansion joints, aircraft parts, furnace parts, heat exchangers, mineral processing screens, all standard methods of welding, with or without filler metal.
Product Basic Information:
Material | ASTM 321 | ||
Chemical Composition | Mechanical Properties(In Quenched & Tempered State) 565 °C | ||
C | <0.12 | Tensile strength(MPA) | 205 |
Si | <1.00 | Yield strength (MPA) | 540 |
Mn | <2.00 | Elongation(δ5/%) | 40 |
Cr | 17.00-19.00 | Reduction in Area (ψ/%) | 50 |
Mo | - | Impact (J)v | -- |
P | ≤0.035 | Hardness | <187 |
S | ≤0..030 | ||
N | 0.35-0.50 | ||
Ni | 8.00-11.00 | ||
Similar steel grade & equivalent steel materials:
USA | Japanese | Gemany | British | France | International | Chinese |
ASTM&AISI&SAE | JIS | EN DIN | EN BS | EN NF | ISO | GB |
321 | SUS321 | X6CrNiTi18-10(1.4541) | ------ | 1Cr18Ni9Ti |
Seamless steel pipe process：
The production process of general seamless steel tubes can be divided into two types: cold-drawn and hot-rolled. The production process of cold-rolled seamless steel tubes is generally more complicated than hot-rolled. The tube blank must first be subjected to three-roll continuous rolling, and then extruded. In the sizing test, if the surface does not respond to cracks, the round pipe is cut by a cutter and cut into a blank of about one meter in length. Then enter the annealing process. Annealing must be acid-washed with an acidic liquid. When pickling, pay attention to whether there is a large amount of blistering on the surface. If there is a large amount of blistering, the quality of the steel pipe cannot meet the response standard. The appearance of cold-rolled seamless steel pipe is shorter than that of hot-rolled seamless steel pipe. The thickness of cold-rolled seamless steel pipe is generally smaller than that of hot-rolled seamless steel pipe, but the surface looks brighter than thick-walled seamless steel pipe. It's rough, and it doesn't have too much burr. The hot-rolled seamless steel pipe is generally delivered in the hot-rolled state after heat treatment. Hot-rolled seamless steel pipes are subject to strict manual selection by the staff after quality inspection. After the quality inspection, the surface is oiled, followed by multiple cold-drawing experiments. After the hot-rolling treatment, a perforation experiment is performed. If the diameter of the perforation is too large, straightening correction is required. After straightening, it is transferred to the flaw detector by the conveying device for flaw detection experiments. Finally, the labels are labeled and the specifications are arranged and placed in the warehouse.
Our Service
We pursue the administration tenet of 'Quality is remarkable, Services is supreme, Status is first', and will sincerely create and share success with all customers for AISI 201 304 304L 316L 310S 321 Stainless Steel Round Bar with China Standard. After continuous efforts, our product series have been continuously improved, and have been well received with its reasonable structural design, complete functions, reliable quality and other performance characteristics. Our company's new product research and development capabilities and product delivery capabilities are in the leading position, our testing, testing equipment and means are advanced and complete. Our production capacity and after-sales service capabilities continue to enhance, our company is gradually becoming a modern enterprise with standardized management.