Sichuan Liaofu Special Steel Company is one of the most experienced manufacturers and suppliers of triangular mild steel bar ss400 in China. With over 20 years' experience, our factory offer high quality products made in China with competitive price. Welcome to contact us for wholesale service.
Products Description
Triangular Mild Steel Bar Ss400,also known as A3 steel, is an ordinary carbon structural steel. This kind of material has moderate carbon content, and has good comprehensive properties such as strength, plasticity and weldability. With the increase of thickness, its yield value becomes smaller, and it is a commonly used steel on the market, often used to make steel bars or factory frames, and can also make mechanical parts with low performance requirements.
Chemistry
| C | Mn | P | S | Si | Ni | Cr | Cu | N | Mo |
| .15 Max | .60 Max | .050 Max | .050 Max |
Mechanical Properties
| Tensile | Yield | Hardness | Elongation | Reduction Area |
| 400-510 N/mm2 | 235 N/mm2 Min. |
Triangular Mild Steel Bar SS400 is essentially equivalent to China's Q235 (specifically Q235A). However, there are differences in certain specific indicators. Q235 specifies the content of elements such as C, Si, Mn, S, and P, whereas SS400 only requires S and P to be less than 0.050%.
The yield point of Q235 is greater than 235 MPa, while that of SS400 is 245 MPa. SS400 (structural steel for general use) indicates that the tensile strength of general structural steel is greater than 400 MPa. In contrast, Q235 represents ordinary carbon structural steel with a yield point greater than 235 MPa.
The standard number for SS400 is JIS G3101, while that of Q235 is GB/T700. SS400 is a designation method used in Japanese standards, and in fact, it is equivalent to domestic Q235 steel. It is a type of structural steel material. The "Q" in Q235 stands for "yield point," and "235" refers to the approximate yield strength value, which is around 235 MPa. The yield strength tends to decrease as the thickness of the material increases.
Due to its moderate carbon content, Q235 exhibits a good balance of strength, ductility, and weldability, making it the most widely used steel type. It is commonly rolled into wire or various steel profiles such as round bar, square bar, flat bar, angle bar, I-beam, channel steel, window frame steel, and medium-thickness steel plates.
This steel is widely used in construction and engineering structures, including the manufacturing of reinforcement bars, plant frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, and more. It is also extensively employed for mechanical parts with low performance requirements. Grade C and D steels can also be used for certain special-purpose applications.
Please check triangle steel bar pictures below
FAQ
Q: Can you produce custom triangle sizes if my dimensions are not standard?
A: Yes. We focus on small batches and special shape sections. If you send a cross-section drawing, we can modify an existing die or make a new one. We have produced nearly 100 different profiles, including trapezoids and L-shapes.
Q: What is the straightness tolerance for your 4-meter bars?
A: Our standard is 0.5mm per meter. For 4-meter bars, we check the total bow before bundling. If you feed these into CNC lathes automatically, let us know so we can select the straightest bars or arrange peeling for smooth feeding.
Q: What is the length tolerance if you cut the bars?
A: We cut using band saws or circular saws. The standard length tolerance is +5/-0mm, and ends are deburred. If you need highly precise short pieces (e.g., 100mm), we can use a precision saw for an extra cutting fee.
Q: Is SS400 suitable for outdoor structures without coating?
A: No, SS400 is a mild steel and will rust outdoors. We recommend primer, paint, or galvanizing. We supply the raw hot-rolled black bars produced at our in-house base, and can arrange shot-blasting and painting if needed.
Q: Can I mix round bars and triangle bars in one container?
A: Yes. We can arrange mixed containers to save you freight costs. There is no strict MOQ for individual sizes if we combine them into a full 20ft or 40ft load. Just send your list.
Hot Tags: triangular mild steel bar ss400, China, manufacturers, suppliers, factory, Triangular Mild Steel Bar Ss400, Triangle Steel Bar