Products
JIS SUS 15-5PH Stainless Steel Bar
video
JIS SUS 15-5PH Stainless Steel Bar

JIS SUS 15-5PH Stainless Steel Bar

15-5PH(0Cr15Ni5Cu4Nb) is martensitic precipitation-hardened stainless steel with high strength, high hardness and excellent corrosion resistance, very good lateral toughness and ductility, and very high malleability. The workability of 15-5PH is similar to that of other precipitation-hardened stainless steels, and the low temperature heat treatment can achieve age-hardening in one step. The material is used in parts that require high lateral strength and toughness, such as valve parts, joints, fasteners, shafts, gears, chemical processing equipment, paper mill equipment, aircraft parts and nuclear reactor parts.

Sichuan Liaofu Special Steel Company is one of the most experienced manufacturers and suppliers of jis sus 15-5ph stainless steel bar in China. With over 20 years' experience, our factory offer high quality products made in China with competitive price. Welcome to contact us for wholesale service.

 

JIS SUS 15-5PH Stainless Steel Tool BarJIS SUS 15-5PH Stainless Steel Tool BarJIS SUS 15-5PH Stainless Steel Tool Bar

15-5PH is martensitic, precipitated hardened, chromel copper stainless steel with excellent surface smoothness and dimensional stability. Good processing technology, excellent mechanical properties, resistance to general corrosion environment. The bell was popularized in the mid-1990s.

The steel has good strength, toughness and ductility, transverse, hardness and corrosion resistance comparable to 304 stainless steel.

Mechanical properties editor broadcast

Tensile strength σb(MN/m2) >=550

Yield strength σs(MN/m2) >=200

Elongation δ5 (%) > =40

Shrinkage rate (%) > =55

Hardness: ≤187HB; 90 HRB or less; 200 hv or less

If it is used at a high temperature of 700℃, 15-5PH should be competent, because it is not only austenitic stainless steel, but also a very widely used austenitic thermal strength steel, but it is best not to exceed 750℃, its heat treatment is solid solution treatment, that is, heating to more than 1000℃, after holding for a certain time water quenching, Then use higher than the use of temperature 60~100℃ for aging.



15-5 ph Stainless Steel Mechanical Properties

ConditionUltimate Tensile Strength (PSI)0.2% Yield Strength (PSI)Elongation (% in 2in.)Reduction Of Area (%)Hardness BrinellHardness Rockwell
H900190,000170,000615388C40
H1025155,000125,000827331C35
H1075145,000125,000928311C32
H1150135,000105,0001130277C28
H1150-M115,00075,0001435255

Mould steel die steel

Hot Tags: JIS SUS 15-5PH Stainless Steel Bar, China, manufacturers, suppliers, factory, 4J29 Precision Alloy Steel bar, Grade 904L ASTM 312 Standard Stainless Steel Pipe, Super Duplex 1 4462 2205 Stainless Steel Sheet Plate, 316 Square Stainless Steel pipe, 316 Stainless Steel Hollow bar, 20mm Triangle Magnetic Chamfer For Concrete Structures

Send Inquiry