We take customer needs as the core, through continuous organizational changes and management improvements, to provide customers with satisfactory plastic mould tool steel, D2 Mould Steel Bar, Bearing Steel Bar and services. In terms of service, the company will continue to adhere to the customer first business philosophy, continuously improving customer service levels, and increasing customer loyalty. We can design, develop and manufacture the products according to the requirements of customers, so as to make the customers satisfied. Although everyone has different definitions of success, we do our best to help each employee fully display his or her intelligence at work. We are confident that we'll share mutual accomplishment and create solid co-operation relations with our companions within this market place.
GR1 GR2 GR5 titanium plate sheet supplier
1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm³,it is just 60% of steel.So,it is very lighter than most other metals.We can use it to make high strength,good rigidity and light quality products.
2. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkai
3. Non magnetic nature:as it is a sort of Non magnetic metal,it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood.So,it is widely adopted in the field of Medical Science.
Titanium plate:
1. Product name: Titanium Sheet plate
2. Material:titanium GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR12-GR29,Ti11Cr-13v-3Al
3. Standard:Customized
4. Specification: Customized
5. Origin:Baoji, China
6. MOQ:10kg
1.Chemical requirements of titanium plate
N | C | H | Fe | O | Al | V | Pa | Ti | |
Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | bal |
Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | bal |
Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | bal |
Gr 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | / | / | / | |
Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | bal |
Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | bal |
Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | bal |
2.Tensile requirements of titanium plate
| Grade | Tensil strength(min) | Yeild strength(min) | Elongation(%) | ||
ksi | MPa | ksi | MPa | ||
1 | 35 | 240 | 20 | 138 | 24 |
2 | 50 | 345 | 40 | 275 | 20 |
3 | 65 | 450 | 55 | 380 | 18 |
4 | 80 | 550 | 70 | 483 | 15 |
5 | 130 | 895 | 120 | 828 | 10 |
7 | 50 | 345 | 40 | 275 | 20 |
9 | 90 | 620 | 70 | 438 | 15 |
Equipment
Quality Control:
Our products will be 100% checked and inspected by our QC before packing and shipment.
ISO 9001:2008 certificate
Quality Inspection:
1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center
2. 100% ultrasonic test(UT)
3. Inspect if the surface of the material is contaminated.
Packing
Our Service
Our improvement depends on the superior equipment, excellent talents and continuously strengthened technology forces for Titanium Gr1 Gr2 Gr5 Gr7 Gr9 Gr12 ASME SB265 Clad/Cladding/Cladded Tube Sheets Baffles Support Plates Tubesheets ASTM B265 Titanium Gr.2 Gr.5 Gr.7 Gr.9 Gr.1. With the attitude of high starting point, high standard and strict requirements, our company meticulously creates every product and makes every customer satisfied. Good service is an effective criterion for our company, which has earned us a number of loyal customers.