We always pursue to keep pace with the world technology, develop generation after generation of superior plastic mould tool steel, 65Mn Spring Steel Strip, 316 Stainless Steel Wire with low price, and enhance the core competitiveness. Since its inception, we have been in line with the principle of good faith, down-to-earth style, won the trust of many manufacturers. On the basis of summarizing the existing technologies at home and abroad, we adopted innovative technologies, obtained customer recognition and achieved good economic benefits. It is our great honor to meet your demands. We have accumulated experience since the establishment of our company, combined with the feedback from the majority of businesses and gradually completed our brand positioning.
Production
D2 mould steel plate
D2 mould steel sheet is an air hardening, high carbon, and high chromium tool steel possessing extremely high wear resisting properties.
D2 steel is commonly used in the machining industries to manufacture dies and punches that repeatedly cut other materials.
D2 Steel is extremely tough and durable! The high chromium content provides good corrosion resistance, ( but it can and will rust
if it is not properly taken care of ). The blades are heat treated to a 62 Rockwell hardness and are guaranteed to retain their
factory edge for extended periods of heavy use. When it does come time to re-sharpen, the blades will hone to a razor edge.
Production
Product Basic Information:
Chemical Composition:
C | Si | Mn | P | S | Cr |
2.0~2.3 | ≤0.40 | ≤0.40 | ≤0.030 | ≤0.030 | 11.5~13.0 |
Production
Available sizes：
Cold rolled steel sheets:Thickness 1.0-2.5mm,Width 650-850mm,Length 1500-2500mm
Hot rolled steel sheets:Thickness 2.5-12mm,Width 650-850mm,Length 1500-2500mm
Production
Heat Treatment:
Heat treatment Annealed(+A) max: 255HB Annealing: slow cooling at 650ºC-850ºC furnace Quenching: Preheat 650ºC~750ºC increased to 1010ºC, air-cooled, or into the 996ºC to keep the salt bath, then cooled. Tempering: The cold work D2 tool steel general tempering temperature is 170ºC-190ºC , Double tempering of Double tempering of D2 tool steel is recommended.
Production
Product Application Areas:
1.D2 mould steel sheet is wide variety of tool making applications
2.Blanking dies and punches
3.Deep drawing dies, cupping dies, forming dies, sheet metal forming rolls
4.Master hobs for cold hobbing moulds and cut moulds for plastics
Production
Packing & Delivery
Packing Details : Export standard package,bundled or be required.
The inner size of container is below:
20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high)
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high)
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high)
Delivery Details : 7-15 days,or according to the order quantity or upon negotiation
Package | With strips, wooden pallets, standard export package or as required |
Lead Time | 7-10 days after get deposit |
Payment Terms | T/T, L/C |
Price Terms | FOB, CRF, CIF, EXW |
MOQ | 1 Ton |
Our Service
Our progress depends around the innovative machines, great talents and consistently strengthened technology forces for Hot Rolled 6150 Data Alloy Steel Sheet. In order to adapt to the new requirements of the global low-carbon economy, our company is constantly committed to research and development, production and sales of energy-saving environmental protection products. We take 'innovation, fashion, vitality' as the brand connotation, 'Initial & Inspire' as the research and development policy.