Reasonable Value and Efficient Service' for 39nicrmo3 properties, plastic mould tool steel, GR9 Titanium Bike Frame. Our company is devoted to continuously provide customers with reliable, safe power products and services. We always listen to the voice of customers, timely solve the problems of customers and constantly improve and enhance the quality of products to meet the new needs of the market.
D2 SKD11 mould steel bar
D2 SKD11 mould steel bar apply to metal stamping die, drawing die, stainless steel sheet stamping die, die with high hardness; Lightweight materials used for cutting, thread rolling dies, drawing, pressure pads ; highly wear-resistant plastic mold.
Product Basic Information:
1.D2 SKD11 mould steel chemical composition &mechanical properties:
| Material | AISI D2 | ||
Chemical Composition | Mechanical Properties(In Quenched & Tempered State) | ||
C | 1.40-1.60 | Tensile strength(MPA) | - |
Si | <0.60 | Yield strength (MPA) | - |
Mn | <0.60 | Elongation(δ5/%) | -- |
Cr | 11.00-13.00 | Reduction in Area (ψ/%) | - |
Mo | 0.70-1.20 | Impact (J) | - |
P | ≤0.030 | Brinell Hardness (HBW) | <255 |
S | ≤0..030 | ||
V | 0.5-1.1 | ||
Ni | - | ||
2.Similar steel grade & equivalent steel materials:
USA | Japanese | Gemany | British | France | Heat treatment | Chinese |
ASTM&AISI&SAE | JIS | EN DIN | EN BS | EN NF | ISO | GB |
AISI D2 | SKD11 | X153CrMoV12 1.2379 | ------ | Cr12Mo1v1 | ||
Surface Treatment
Origin Black, Orign cold rolled bright, Machined, Grinded
Meterial and Manufacture:
Unless otherwise specified, D2 tool steel covered by this specification shall be made by an electric melting process.It shall be made from ingots or slabs that have been reduced in cross section in such a manner to such a degree as to ensure proper refinement of the solidification structure.
Ultrasonic Quality：
D2 SKD11 Tool steel will be ultrasonically tested at appropriate stages of the manufacture to ensure the quality,when and as agreed upon between seller and purchaser.
Quality assurance：
ISO 9001 certified,IQNET,CQC.
Steelmaking Process：
EF,EF/EAF+LF+VD,EF/EAF+ESR 
Packing & Delivery
FAQ
1.What is the Small QTY Process Charge?
It is the payment for custonmer whose order qty is less then Min Order Qty.Because small qty of products should be processed same in the production flow as big qty and the average cost would get much higher then gones.So there is small Qty Process Charge to ensure the profit of our factory and ususlly the amount of it is about $250.00.
2.Could the steel be customized for us?
Yes.We are the professional manufacturer which has rich experience in Precision Seamless Steel Sheet manufacturing.We could print the logo and label under your requirments if you need OEM product.Besides this ,we will do some refined processes like CNC cutting,chamfering galvanization and tapping.If you have detailed spec or drawing our production lead time is within 30-45 days.
Our Service
Our company will strengthen the production of D2 DIN 1.2379 Cr12Mo1V1 Mould Steel Die Steel Bar Flat Bar and constantly improve the performance of products. Our company has a strong alliance and seeks strategic partners from all over the world, so that we can realize the brilliant future together! Thank you for your business and support!