We regard customer needs as our own, participate in market competition with high-quality Titanium Alloy Bar Grade 5, Super duplex stainless steel plate, Aisi 4130 Seamless Steel Tube, and provide customers with more comprehensive and better services. And we are going to surely present you with the best quotation and after-sale service. The growth of our company requires the addition of talented team members who are in line with our high-energy and entrepreneurial culture.
Introduction
High quality 316 din 1.4401 stainless steel bar price.
Standards: ASTM, JIS, GB, EN ( DIN, BS, NF) Or Per as clients' requires.
Stainless steel grade 316Ti contains a small amount of titanium. Titanium content is typically only around 0.5%. The titanium atoms stabilise the structure of the 316 at temperatures over 800°C. This prevents carbide precipitation at the grain boundaries and protects the metal from corrosion. The main advantage of 316Ti is that it can be held at higher temperatures for a longer period without sensitisation (precipitation) occurring. 316Ti retains physical and mechanical properties similar to standard grades of 316.
Product Basic Information:
|
Material |
ASTM 316 | ||
|
Chemical Composition |
Mechanical Properties(In Quenched & Tempered State) 565 °C | ||
|
C |
<0.08 |
Tensile strength(MPA) |
205 |
|
Si |
<1.00 |
Yield strength (MPA) |
520 |
|
Mn |
<2.00 |
Elongation(δ5/%) |
40 |
|
Cr |
16.00-18.00 |
Reduction in Area (ψ/%) |
60 |
|
Mo |
- |
Impact (J)v |
-- |
|
P |
≤0.035 |
Hardness |
<187 |
|
S |
≤0..030 |
||
|
N |
0.35-0.50 |
||
|
Ni |
10.00-14.00 |
||
3Technical parameters
|
Specifications |
|
|
Chemical component |
C≤0.08,Si≤1.00,Mn≤2.00,P≤0.045,S≤0.03,Ni:10.0-14.0,Cr:16.0-18.5,Mo:2.0-3.0 |
|
Mechanical property |
Tensile strength(Mpa) 620
Yield strength(Mpa) 310 |
About us:
The company has always been based on "quality first, integrity-based" service quality as a bridge to our success, we sincerely hope to establish cooperative relations with our customers. We will give back to every customer with quality service, preferential price and better products. Develop together.
What is stainless-steel bar or round rod and what is it used for?
Stainless-steel bar or rod is used in various applications and is widely used in the construction industry due to its durability and resistance to corrosion and rust.
Our stock of bars and rods are available in a wide range of diameters from 3mm right up to 76.2mm in lengths of up to 3 metres and supplied in 3 metal grades.
303 - has good corrosion resistance, free machining, not suitable for welding or forming.
304 - has good corrosion resistance, suitable for forming and welding, average machining.
316 - Is our highest grade and has excellent corrosion resistance, is suitable for forming and welding, but is a little harder to machine.
Main business：
Main: 304 stainless steel plate, 316L stainless steel plate, 310S stainless steel plate, 304 stainless steel pipe, 316L stainless steel pipe, 310S stainless steel pipe and other thin, medium and thick plates, and according to the needs of special stainless steel users, we can also order all kinds of special specifications Stainless steel.
Our Service
Our competitive advantage is to utilize our advanced technology to reduce the cycle cost of products and provide customers with high-quality and low-cost 316 Cold Rolled Equal T Bar Stainless Steel Structural Steel T Bar. The company attaches great importance to product quality and service quality, based on the business philosophy 'good with people, genuine to whole world, your satisfaction is our pursuit'. The foundation of a learning enterprise must be based on the accumulation of knowledge and the improvement of overall quality.